Get a free quote

Sanding and refinishing a hardwood floor

Big Bro Hardwood / Hardwood Floor Sanding and Refinishing Deerfield

Hardwood Floor Refinishing Deerfield

We sand and refinish hardwood floors in Deerfield, with the owner on every job and one crew, no subcontractors. Many Deerfield ranches hide original oak under old carpet. Free in-home estimate within 24 hours.

From $3/sq ft
17+ Years, 500+ Projects
Dust-Controlled Sanding, 95%+ Captured
Ranches & Split-Level Colonials
Every Deerfield Neighborhood

Professional Hardwood Floor Refinishing in Deerfield

Red Oak floors stained with Espresso Color, applied with Pallmann X Power

View of the kitchen with hardwood flooring

Room with big windows and new refinished hardwood flooring

Big Bro Hardwood is a hardwood floor refinishing company working in Deerfield, IL, run by its owner. We sand and refinish solid and engineered wood floors in Deerfield homes, bringing back oak that’s gone dull, scratched, gray or marked by water. Close to half of Deerfield’s homes were built between the 1940s and 1960s, and under old carpet or a worn finish, that original oak is usually still there and worth saving.

Hardwood Floor Sanding Across Deerfield Neighborhoods

Our hardwood floor sanding service covers every part of Deerfield. We work in Brookside’s 1950s ranches and split-levels, the 1960s and 1970s colonials and bi-levels of Clavinia, the wooded lots of Woodland Park, and homes in Meadowbrook, Deer Run, Northeast Deerfield and Scatterwoods.

Hardwood Floor Refinishing Services Cost in Deerfield, Illinois

Sanding and finishing most oak floors over 1,000 sq ft starts at $3–$4 per sq ft, so 1,000 sq ft of oak starts at about $3,000 to $4,000. Nationally, the cost to refinish hardwood floors runs $3–$8 per sq ft. Our prices stay affordable and competitive without cutting corners: Dan (Donatas), the owner, works on every job and treats each floor the way he would treat his own.

Floor or Service	Starting Price*
Full Sand & Refinish, Oak (1,000+ sq ft)	$3.0–$4.0 / sq ft
Mid-Size Floors, Oak (300–1,000 sq ft)	$5.0–$7.0 / sq ft
Small Areas (≤300 sq ft), $1,500 Project Minimum	$8–$10 / sq ft
Prefinished / Aluminum-Oxide Floors	$7.0–$8.0 / sq ft
Maple / Exotic, Clear Coat	$4.4–$5.0 / sq ft
Maple / Exotic, Color Change	$5.25–$6.0 / sq ft
Sandless Refinishing (Buff & Recoat), on Its Own or With Other Work	$1.50–$2 / sq ft
Color Change on Oak	Add $1–$2 / sq ft
Third Coat of Finish, Whole Floor	Add $1 / sq ft

*Starting ranges for our professional hardwood floor refinishing service, with labor and standard finish included. Every quote is itemized line by line, so it is easy to compare with other local hardwood floor refinishers, and carpet removal is its own line: ask which prep you can safely do yourself. For a rough number, try our floor refinishing cost calculator or book a free hardwood floor estimate.

Add-ons:

$1.75–$2.00 / sq ft

Wax finish removal (older floors)

$80–$100 / tread

Stairs (treads only)

Per inspection

Full staircase / handrails & balusters

Refinish, Recoat, Repair Boards or Replace?

Most floors can be saved with hardwood floor repair and refinishing. If you’re deciding whether to refinish or replace hardwood floors, keeping your floor is usually the more affordable choice: installation labor alone runs $3.00–$9.50/sq ft, before the new wood and $1–$3/sq ft to remove the old floor.

What You See on Your Floor	What It Usually Needs	How Often
Dull finish or light scratches, no bare or gray wood	Buff & recoat (sandless), also called screen and recoat	Every 3 to 7 years
Deep scratches, gray or worn spots, or you want a new color	Full sanding down to bare wood and new finish coats	Every 7 to 10 years
A few cracked or loose boards, or marks that soaked in deep	Board replacement as part of the refinishing job	As needed
Nail heads or tongues showing, boards cupped through or rotted	A new hardwood flooring installation; we tell you honestly when a floor can’t take another sand	Not applicable

Collage with refinished hardwood floors with special walnut stain

Floor Sanding and Refinishing in Older Deerfield Homes

Deerfield’s housing stock runs from older ranches to newer infill, and the age of a home changes what we find under the finish. We check for these before quoting.

Pre-1940 homes. About 3.5% of Deerfield’s housing dates from before 1940, and the oak in these can carry an old wax or shellac finish that a simple buff and recoat won’t bite into. We identify the old finish first and add stripping steps where needed before sanding.
1940s to 1960s construction. Close to half of Deerfield’s homes were built in this stretch, which puts many at or before 1978, when lead paint was common. In those homes we follow EPA RRP lead-safe practices, with containment and HEPA cleanup around the work area.
Original oak sanded before. Floors from the 1940s through the 1960s have often been sanded down more than once over the decades. We look at how much solid wood is left above old sanding marks before taking on another full sand, since there’s a limit to how many times oak can go down to bare wood.
1970s to 1980s additions. Homes from this era, including subdivisions like Deer Run, sometimes have a later addition with a different oak run next to the original floor. Matching color and sheen across the seam takes an extra test board, and a perfect match isn’t always possible.
Newer infill and condos. About 12.5% of Deerfield’s units were built in 2010 or later, and newer construction here is more likely to use engineered wood or factory-finished boards. We measure the wear layer before sanding, since engineered floors can only be sanded if there’s enough real wood above the core.

Our Professional Hardwood Floor Refinishing Process and Timeline in Deerfield

You can usually stay home during the work. Up to about 300 sq ft takes 1 to 2 days, and a one-day refinish may be possible. About 1,000 sq ft takes 3 to 4 days, since each coat must dry before the next.

Before Day 1: Estimate and Inspection

We measure the floor, check wear, damage, loose boards and squeaks, and go over color, sheen and what’s included. Buying a home? We can do a free estimate before you close, so the floors are done before the furniture moves in.
Day 1: Protection and Rough Sanding

We cover walls, cabinets and transitions and run an Atomic Dust Containment System with HEPA-filtered Festool vacuums, which captures 95% or more of the dust at the source, though edges and corners always leave some fine residue. Professional floor sanding starts in a controlled grit sequence across the field. Sanding is loud, so plan work-from-home days around it.
Day 2: Fine Sanding and Repairs

We detail edges and corners so the whole room looks even, fix damaged boards and small gaps, and clean the surface so color takes evenly.
Day 3: Stain

After hardwood floor sanding, we test stains right on your floor and apply the color you pick. On red oak, lighter browns bring out the red and darker colors show scratches more easily, and a perfect match with older or discontinued wood isn’t always possible. Without a color change, this day goes to finish coats.
Day 4: Finish Coats

We apply 2 coats of finish as standard, or 3 if you choose the extra coat. Our low-VOC water-based finishes give off far fewer fumes than oil-based polyurethane, which often means planning how long to stay out of the house after refinishing. Bona (GREENGUARD Gold) and Loba (EMICODE EC1) products are safe for families and pets once cured.
After the Last Coat: Walkthrough and Moving Back In

We walk the floor with you, do touch-ups and leave care instructions: knowing how to maintain hardwood floors keeps the new finish looking good longer. Light foot traffic is usually fine after about 24 hours, and pets can come back after 24 to 48 hours. Furniture goes back after 3 to 5 days and rugs after 5 to 7 days, because how long polyurethane takes to dry sets the pace for each stage. Put felt pads under furniture legs and lift pieces into place instead of dragging them.

Freshly refinished bright hardwood floors

Dark restored hardwood flooring view from top

Refinished old hardwood floor by Big Bro Hardwood

Red Oak floors stained with Golden Oak stain from Duraseal selection, applied with Loba 2k Duo

Brazilian Cherry Wood stained with Duraseal Natural color.

Why Deerfield Homeowners Choose Big Bro Hardwood as Their Floor Refinishers

Nearly one in five Deerfield homes was built between 1970 and 1989, often with solid oak under a finish that’s never been refreshed, and we know what that generation of flooring needs.

Our professional wood floor refinishing crew is led by Dan, the owner, with Valdas (20+ years in hardwood flooring) and Slavek (37 years of stair and finish carpentry). We follow NWFA technical guidelines, our finish carries a 5-year warranty against peeling, and more than 80% of new clients come through referrals.

Village Construction Hours

Deerfield sets fixed hours for construction work: 7:30 AM to 7:00 PM on weekdays, 8:30 AM to 5:00 PM on Saturdays, and no work on Sundays or legal holidays. We schedule sanding and finish coats inside those windows.

No Permit Required

New wood flooring falls under the village’s own list of work that needs no permit. So there’s less paperwork before your floor refinishing starts, once we’ve measured the floor and agreed on scope.

Protection for Adjacent Areas

Protection matters whether your Deerfield house is one of the village’s many single-family homes or an attached unit in a smaller multifamily building. We cover doorways, cabinets, trim and vents, and map out how equipment moves through narrower hallways before work begins.

Clear, Itemized Pricing & Scheduling

Communication stays simple from the first estimate, whether your home sits in an older subdivision or near newer development like the apartments going in by Lake Cook Road. You get a written scope and a start date you can plan around.

Dust-Controlled for a Cleaner Home

Dust control matters most in lived-in homes, including smaller pockets like Kings Cove or Colony Point where furniture often stays in the house during the job. Our HEPA-filtered setup keeps most of the mess contained, though fine residue at edges and corners is normal.

Keeping the Site Clean

Debris removal stays straightforward in Deerfield, since dumpsters don’t need a special village permit. On larger jobs we keep the work area and any shared walkways clear and orderly for the length of the project.

Recent Hardwood Floor Refinishing Projects in Deerfield, IL

Sanding the new herringbone white oak floor, Deerfield, IL (in-process)

Before

Herringbone white oak floor in the great room with a fireplace, Deerfield, IL

After

Herringbone white oak floor in the two-story great room by the windows, Deerfield, IL

Close view of the Rustic Beige herringbone pattern by the fireplace, Deerfield, IL

Staircase with iron balusters over the herringbone white oak landing, Deerfield, IL

Foyer with columns and a Rustic Beige herringbone white oak floor, Deerfield, IL

Herringbone White Oak Floor Refinishing in Deerfield, IL: Rustic Beige Before and After

Sanding and refinishing of a herringbone white oak floor in Deerfield, IL, refinished in Rustic Beige and sealed with Loba 2K Duo. The herringbone pattern runs through the two-story great room and entry, with a matching staircase and iron balusters. Dust-controlled sanding kept the home clean.

Location: Deerfield, IL
Wood: White Oak
Color: Rustic Beige
Finish: Loba 2K Duo

Ready to give your hardwood floors a new life? Schedule an appointment today!

contact big bro hardwood

Gre Ber

23:13 18 Mar 20

We couldn’t be more happier with Dan’s work. He’s an amazing crafstman, very knowledgeable with a great eye for details.

When we were getting quotes for our brazilian cherry installation and refinishing project- we’d encountered lots of people to give us a number. Dan didn’t rush to throw out a price and had firm principles laid out before even getting us a quote. His prici g was straightforward and never hit us with any surprise expenses.

He was kind and courteous to us and our new home. He’ll be the first person i think of to recommend to anyone needing new flooring installed and refinished.

Amazing job done ✅
Thank you

READ ON GOOGLE

Our Brands

Frequently Asked Questions

How Do You Handle Floor Refinishing Access at Buildings Like 10 Deerfield?

Buildings like 10 Deerfield, approved in 2021 with 24 affordable housing units, often mean shared hallways and tighter access for sanding equipment. We plan the route in advance and confirm building rules before the first day, so a multifamily address doesn’t slow the schedule down.

Do New Construction Homes in Deerfield Still Need Floor Sanding Later?

Yes, new construction doesn’t skip floor sanding forever. Deerfield’s 2021 community report counted nine new single-family homes under construction, and solid oak in those houses will eventually need its first refinish just like older floors do, usually after years of everyday wear.

Does Deerfield's Location Affect Floor Moisture?

Not based on any town-specific finding we’ve seen. Deerfield sits among several neighboring suburbs, but no local source points to unusual flooding or basement moisture here, so we check each home’s conditions directly before deciding on finish type and drying time.

Request a Free Hardwood Floor Estimate

Tell us about your floors and we'll get back to you within 24 hours.